Low current 10fA, low capacitance 10fF Kelvin measurement

The Kelvin Probe probe rod is equipped with two SSMC connectors. If the tip is damaged by 50 ohms, only the tip can be replaced. The diameter of the tips are 1micron, 40micron, and 100micron. If a pulse speed of <10ns is required, resistors or probes can be connected in series with each other for grounding.

Measurement of high voltage 10KV / high current 50A

The safety of personnel is the most important for the  high voltage，high current measurement , Everbeing is equipped with a protective box for safety protection. The function of this safety mechanism is to send the instrument signal to the probe only when the protective box is closed. At the same time, high impedance liquid must be applied around the target of the needle to prevent sparks from being generated when the needle tip falls instantly. If verification is required before placing an order, please feel free to use it at Everbeing Laboratory. In addition to the probe station, Everbeing can provide high voltage and high current instruments to cooperate.